LMM6012 Black for Metal (Screen Print)

Recommended use
LMM6012, a CerMark™ product, is a special formulation of LMM6000 designed for screen printing application. This makes for an economical process where specific areas can be consistently coated across a wide area. It is a general purpose laser marking ink, and is recommended for creating black marks on a variety of bare metal substrates. LMM6012 will not work on metals with a lacquered coating.

Recommended substrates:
LMM6012 is a somewhat flexible product which is recommended for many metals. The following list is made up of substrates on which LMM6012 works well. This list is not exhaustive, however, so if your substrate does not appear on the list, this does not mean LMM6012 will not mark it.

Lasers that work:
LMM6012 works equally well with CO2 and solid state lasers.

Dilution:
LMM6012 can be screen printed as-is from the container. It can be reduced or thinned if necessary to achieve good coverage with 1588 Medium. 1588 Medium can be used as needed to achieve acceptable print.

For more information on dilution, click here.

Application methods:
Please make sure that the surface to be marked is free and clear of oils, cleaning agent films, dust, and lacquer coating.

• Screen print application: After dilution and thorough mixing, the ink should be applied to the screen using an appropriate applicator, the same as with a conventional screen printing ink. The goal is to set up the printer to apply a consistent coat having a typical thickness of about 1mil (25μm). As with any screen printing process, depending on the workshop environment, the ink may require periodic replenishment and dilution to avoid drying out.
  
  The thinning agent can be used for cleaning the screen and tools after use. Any unused ink should be decanted and stored in a separate sealed container for future use.
  
  

Drying time & methods:
LMM6012 is a slow drying material. It takes about 5 - 15 minutes for the coating to dry at 200-400F temperatures.

Laser Settings:

As LMM6012 is a special order product which requires integration, we do not post laser settings here. Please contact us if you wish to discuss settings for LMM6012.

Product Appearance:
LMM6012 is a smooth, greenish gray, slightly thick ink-like paste, having the consistency of pancake batter.

LMM6012 is the same color when dry, with no gloss. It will dry to a hard film and have moderate resistance to scratching.

Shipping options:

• All LMM6012 products are considered by the US Department of Transportation (DOT) to be “ORM-D” or “Consumer Commodity”. These products may be shipped via ground or air. TherMark does not add any additional charges for ground shipping of this product, but LMM6012 is subject to an additional $40 hazardous materials packing fee if shipped via air. This is due to regulations around the shipping of alcohol-based chemicals on airplanes.
  
  

Product storage:
All LMM6012 products should be stored between 40ºF (5ºC) and 95ºF (35ºC) in a dark, dry place.

Disposal:
LMM6012 is an alcohol-based material. After laser bonding, any excess, un-bonded material can be washed off the substrate and down the drain into your normal water/sewer waste area.

Unused containers of liquid ink/paste should be opened, the alcohol base evaporated into a well-ventilated area, and once only solids remain in the container, the container with solids can be safely disposed of in your regular trash and solid waste area.

Buy Now:
LMM6012 is a special order only product and can take two to three weeks to arrive after your order is placed. For this product, it is best to call in your order to (323) 344-9500 #1.

LMM6012 comes in 4 sizes:

LMM6012.50	50 gm paste ink up to 1,700 sq/in	~$.032 per sq/in	$54.95
LMM6012.250	250 gm paste ink up to 8,500 sq/in	~$.017 per sq/in	$144.95
LMM6012.500	500 gm paste ink up to 17,000 sq/in	~$.014 per sq/in	$244.95
LMM6012.1000	1,000 gm paste ink up to 34,000 sq/in	~$.013 per sq/in	$439.95

Downloads:
LMM6012 paste MSDS
LMM6012 Data Sheet